FC – POTENCIES: OUR METHOD & PRODUCTION

Since 1995 we have been (as the single entity in Europe) continuously producing fluxion potencies with our specially developed equipment acting on the Fincke principle. The main character of this method of potentising is the mechanical insertion of Energy via stirring staff into a continuous circulating excipient medium, a principle that has been known and used for at least 150 years.


Most important for the development of our machine were the following considerations:

All fluxion-potentising machines have in common that two concurrent operations are processed at the same time, also referred to as the not exactly traceable thinning at the continuously affluxion of the dilution appliance (Fincke, Lock), and a less intensive dynamic behaviour (agitationhits, turbulences by dropping, stir-moves…).

 

 

It appeared essential to us to make the thinning steps exactly measureable according to quantity and the appropriate rate in the first place, then execute the dynamic moves as intensive as possible.

The remedy is exposed to an intensive mechanical effect inside of a “dynamising vessel”, the effect of released energy takes place through the rotation (3000 r/min) of a glass rod inside of the dilution, which is continuously thinned by the affluxion trough the steadily accrueing dilution appliance.

As excipient through reverse osmosis cleaned water is used.

 


The essential difference towards Korsakoff – Potencies is the way of doing the attenuation and the nature of adding the kinetic energy. According to custom Korsakoff – Potencies the flasks are filled and depleted incrementally (FC-Potencies continuously) and the dynamising is done through hitting instead of stirring.


 

Both methods have the usage of just one glass for the whole potentisation in common.


The potentising-sequence is as follows:

Level

Method

Trit/Dil.

(chem.) Carrier

Dynamising

C1, C2, C3

Manually

Triturations

Lactose

Manually 1 h

C4

Manually

Dilution

Water

10 hits

C5 – C29

Manually

Dilution

Alcohol

10 hits

C30

Manually

Dilution

Water

10 hits

FC500 – 100.000

Mechanical

Dilution

Water

Rotation (3000 r/min)


Movie
 

With this gadget there are stridden about 20 steps of potentising per minute, or about 28.000 levels in 24 hours (cp. Direction according to LOCK, 24h – 432.000).

The fluxion-potencies are mentioned in not even one pharmacopoeia, which means that there is only the way of getting it issued by a therapist. 

The identification of the remedies:
“Belladonna FC1M”
means
“Belladonna, continuous fluxion, 1000 times passed the volume of the potentising-flask (continuarily action)”

 

Fluxionpotencies in Comparison

History of fluxion potencies

Case with FC-potencies